Firefly Slide Show

















Getting Simonini Victor 1 Ready To Go - Engine/Flywheel Cover Modifications

On the left lower surface of the belt shield three holes were drilled and tapped to hold the fuel pump and a hanger that holds the return coolant tubing in place. Two button head cap screws hold the mag kill switches and another holds a solder terminal to ground.



Looking at the other side, another two holes are drilled and tapped to hold a hanger that holds the upper coolant tubing in place. Two socket head cap screws hold the terminal strip in place, and another ground terminal is held in place with a button head cap screw. This ground terminal will be used to ground the wire shielding for the "Tiny Tach" pickup lead.